• 技術情報
• Save as HPGL File (*.PLT)

Contents

This article helps you to create plot files so that you can send them to a plot-store or to control your settings by reopening them in PlotMaker:

Plotting from the File menu

In case saving several .PLT files see Plotting from Publisher.

1. Save your View from the appropriate View Set in ArchiCAD as *.PLN or as *.PMK file.

2. Open PlotMaker, create a new Layout Book, or open an existing one.

3. Create a New Layout and choose its Master Layout in Layout Settings (e.g. Master A2 Landscape)
   
   

4. Import your *.PLN or *.PMK and place it on the Layout.

5. Go to File menu > Plot > and here click on Plot Setup.

6. Choose from the pop-up on the top left the "Hewlett-Packard" and the "HP DesignJet 650C" or "HP DesignJet 750C" or "HP DesignJet 1050C" from the pop-up below.

7. Set the paper size you want to use (e.g. Metric A2) click OK.

8. Check in the Plot Options… if Scale all at is set to 100% and click OK.

9. In the Plot dialog set the Destination for File. Now you can Save… your Layout on your harddrive or in the project folder.

10. If you save your file you can copy it onto a data carrier and get it plotted at the plot store.

Publishing with Publisher

When you want to save more Layouts as PLT we advise working with Publisher. (File menu > Publisher > Publish…) To publish the PLTs under the name of the Layouts you should

• set in the „View Set Publishing Properties“ the Publishing method to Plot,

• by using Plot Setup you can set the Plotter and paper size as mentioned above,

• here you can select a Spool Folder as well,

• finally click on Publish button.

Check your Plot file

• go to File menu > Open…

• set the file type to HPGL File (*.plt) and choose the just saved *.PLT.

• Open it and controll its settings.

カテゴリプリントプロット