Author: |
|
Creation Date: |
2002-10-12 |
• ArchiCAD 7.0 |
|
Platform: |
• Mac OS X |
Audience: |
• 上級ユーザー |
Reference: |
• [tracking number] |
目次
Components proportional with...
Referenced element |
Length |
Surface A |
Surface B |
Surface C |
Volume |
Wall |
(ref+other)/2 |
ref |
other |
ref+other |
total vol. |
Column |
height |
around veneer |
around veneer |
around veneer |
core+veneer |
Beam |
(left+right)/2 |
left |
right |
total |
total vol. |
Slab |
perimeter |
top |
bottom |
top+bottom |
total vol. |
Roof |
perimeter |
top |
bottom |
top+bottom |
total vol. |
Mesh |
perimeter |
top |
bottom |
total |
total vol. |
Zone |
perimeter |
area |
area |
area |
total vol. |
Object |
length along x axis (=A) |
0 |
0 |
total |
total vol. |
Opening |
width of the opening |
width*height |
width*height |
surface of the elements in the library part |
total volume of the elements in the lib. part |
Abbreviations:
- ref: this means the reference line side of a wall
- other: this means the opposite side of a wall
- left: this means the left side of a beam taking into account his orientation
- right: this means the right side of a beam taking into account his orientation
Notes:
- the left and the right side length of a beam may be different when it is connected to a wall in a non-perpendicular angle.
- some values are intentionally different from the appropriate element list values, as the associated components are usually calulated based on different surfaces. For example you may want to calculate the painted surface of a wall, in this case you are not interested of the egde surface but the sum of the reference and the opposite side surface of the wall.
From ArchiCAD 6.5 R3/v3 on:
- components proportional with column length: Height of the column is taken instead of 0
- components proportional with beam length: (left+right)/2 is taken instead of 0
- components proportional with object length: the parameter A is taken instead of 0
- components proportional with column surfaces: the surface around the core is omitted, only the surface around the veneer is taken. If there is no veneer, the core surface is taken.